Monel Products

Product Details:

Monel 400 Round Bar is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability, and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems. Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and it's melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Product Details:

We are a prominent manufacturer and supplier of a wide gamut of Monel 400 / K500 Sheet. Our entire range of sheet & plates is provided in numerous stipulations to choose from. The Monel Sheets supplied by us are accepted by clients in various spheres of the industries ranging from basic industries such as Sugar, Paper, Textile, Dairy, Engineering to more complex such as Oil & Gas, Petrochemical, Chemical & Fertilizers, Power Generation and Nuclear Industries.

Features:

• High strength
• Precisely designed
• Easy installation

Applications:

• Chemicals
• Fats, & Fertilizers
• Sugar Mills & Distilleries
• Cement Industries
• Ship Builders
• Paper Industries

Product Details:

In our broad assortment of products, we are offering a superior-quality Monel 400 / K500 Tubes. The offered pipe is manufactured from the finest quality material, in complete compliance with quality standards. This pipe can be also customized by our workforce in various specifications. Our pipe is highly demanded in the market, superior strength and optimum quality.
Features:

• Compact design
• Sturdy design
• Accurate dimensions

Type:

• Seamless pipes tubes
• ERW pipes tubes
• Welded pipes tubes
• Fabricated pipes tubes

Form:

• Round pipes tubes, Square pipes tubes
• Rectangular pipes tubes
• Hydraulic pipes tubes etc

Product Details:

Monel K500 Round Bar is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength, and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or Monel K-500 Barsbright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Product Details:

We are one of the renowned industries which are providing several kinds of supreme quality Monel 400 Round Bar in the market. Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability, and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most fresh waters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Product Details:

Monel K500 Round Bar is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength, and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F.

Product Details:

We are offering Monel 400 Flanges to our client.

Product Details:

We are offering Monel Olet Fittings to our client.

Product Details:

We bring in for our client's wide range of Monel Equal Union is used in numerous industrial applications. We continue to offer a robust quality of Monel Equal Union Fitting with very reasonable prices across all over the world. We welcome your query and happy to club you in our list to provide you with the best service of Vinnox Piping Products. We have also employed experts in Monel Equal Union Fitting Product development so as to cater with diversified demand of Monel Equal Union Fitting and therefore, we are reckoned for dealing in a large number of Monel Equal Union Fitting products with great precision.

Applications:

• Structure Pipe, Plumbing Pipe, Chemical Handling Pipe, Gas Pipe, Drinking Water Pipe

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability, and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Product Details:

We are offering Monel K500 Flanges to our client.

Product Details:

We are offering Monel K500 Flanges to our client.

Product Details:

Monel Wire is made of the excellent combination of nickel and copper, offers exceptionally high corrosion resistance in the normal conditions and it has refined wearability to warm and dense alkali as well as a neutral solution. It has high tensile strength and used in marine applications and hydrocarbon treatment

Specification:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability, and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and it's melting point is 2370-2460° F.

Product Details:

We are offering Monel Fasteners to our client.